Parameter
Description
Machining
•
•
•
Machining
•
direction
•
Position
•
•
•
•
D
Maximum depth infeed - (only for ∇)
XDA
1. Grooving limit tool (abs) – (only for face machining direction)
XDB
2. Grooving limit tool (abs) – (only for face machining direction)
UX or U
Finishing allowance in X or finishing allowance in X and Z – (only for ∇)
UZ
Finishing allowance in Z – (only for UX)
BL
Blank description (only for ∇)
•
•
•
XD
- (only for ∇ machining)
- (only for blank description, cylinder and allowance)
•
•
ZD
- (only for ∇ machining)
- (only for blank description, cylinder and allowance)
•
•
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
∇ (roughing)
∇∇∇ (finishing)
∇+∇∇∇ (complete machining)
Face
Longitudinal
front
back
inside
outside
Cylinder (described using XD, ZD)
Allowance (XD and ZD on the finished part contour)
Contour (additional CYCLE62 call with blank contour – e.g. cast iron mold)
For blank description, cylinder
–
Version, absolute:
Cylinder dimension ∅ (abs)
–
Version incremental:
Allowance (inc) to maximum values of the CYCLE62 finished part contour
For blank description, allowance
–
Allowance on the CYCLE62 finished part contour (inc)
For blank description, cylinder
–
Version, absolute:
Cylinder dimension (abs)
–
Version incremental:
Allowance (inc) to maximum values of the CYCLE62 finished part contour
For blank description, allowance
–
Allowance on the CYCLE62 finished part contour (inc)
Programming technology functions (cycles)
9.3 Contour turning
Unit
mm
mm
mm
mm
mm
mm
mm
419