Sensor Servers - Motorola WiNG 5.5 Reference Manual

Refresh

13.3.27 Sensor Servers

Access Point Statistics
Sensor servers allow the monitor and download of data from multiple sensors and remote locations using Ethernet TCP/IP or
serial communication. Repeaters are available to extend the transmission range and combine sensors with various frequencies
on the same receiver.
To view the network address and status information of the sensor server resources available to the access point:
1. Select the Statistics
2. Select System
connected access points.
3. Select Sensor
The Sensor Servers
IP Address/
Hostname
Port
Status
Refresh
Select the Refresh button to update the screen's statistics counters to their latest values.
menu from the Web UI.
from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its
Servers.
Figure 13-86 Access Point - Sensor Servers screen
screen displays the following:
Displays a list of sensor server IP addresses or administrator assigned hostnames. These are
the server resources available to the access point for the management of data uploaded from
dedicated sensors.
Displays the numerical port where the sensor server is listening. Unconnected server
resources are not able to provide sensor reporting.
Displays whether the server resource is connected or not.
Select the Refresh button to update the screen's statistics counters to their latest values.
Statistics 13 - 129