Table of Contents
Advertisement
12. Select
OK
to save the changes and overrides made to the profile's Management Settings. Select
saved configuration.
13. Select the
Firmware
tab from the Management menu.
Figure 5-205 Device Overrides - Management Firmware screen
14. Refer to the
Auto Install via DHCP Option
Enable Configuration Update
Enable Firmware Update
15. Use the parameters within the
upgrade from a controller based file.
Enable Controller Upgrade
of AP Firmware
Number of Concurrent
Upgrades.
16. Select
OK
to save the changes and overrides made to the profile's Management Firmware configuration. Select
revert to the last saved configuration.
17. Select
Heartbeat
from the Management menu.
field to define automatic configuration file and firmware updates.
Select this option to enable automatic configuration file updates for the controller
profile from a location external to the access point.
If enabled (the setting is disabled by default), provide a complete path to the target
configuration file used in the update.
Select this option to enable automatic firmware updates from a user defined remote
location. This value is disabled by default.
Automatic Adopted AP Firmware Upgrade
Select the access point model to upgrade using its associated Virtual Controller AP's
most recent firmware file for that model. This parameter is enabled by default.
Use the spinner control to define the maximum number (1 - 20) of adopted APs that
can receive a firmware upgrade at the same time. Keep in mind during a firmware
upgrade, the access point is offline and unable to perform its normal wireless client
support function until the upgrade process is complete.
Device Configuration 5 - 317
Reset
to revert to the last
field to define an automatic firmware
Reset
to
Hide quick links:
Advertisement
Table of Contents
