Ldap Agent Status - Motorola WiNG 5.5 Reference Manual

4. Refer to the General
IP For Port-Limited Monitoring
The access point
Critical Resource
Name
Via
Status
Error Reason
Mode
Refresh

13.3.18 LDAP Agent Status

Access Point Statistics
When LDAP has been specified as an external resource (as opposed to local access point RADIUS resources) to validate PEAP-
MS-CHAP v2 authentication requests, user credentials and password information needs to be made available locally to
successfully connect to the external LDAP server. Up to two LDAP Agents (primary and secondary external resources) can be
defined as external resources for PEAP-MS-CHAP v2 authentication requests.
AP6511 and AP6521 model access point do not support this feature in Standalone AP or Controller AP mode. However, AP6511
and AP6521 models are supported when adopted and managed by a controller or service platform.
For more information on setting LDAP agents as part of the RADIUS server policy, see
9-35.
To view access point LDAP agent statistics:
1. Select the Statistics
2. Select System
connected access points.
3. Select LDAP Agent
field to assess the Monitor Interval
of critical resources.
Critical Resource screen displays the following:
Lists the name of the critical resource monitored by the access point. Critical resources are
device IP addresses on the network (gateways, routers etc.). These IP addresses are critical to
the health of the network. These device addresses are pinged regularly by access points. If
there's a connectivity issue, an event is generated stating a critical resource is unavailable.
Lists the VLAN used by the critical resource as a virtual interface. The critical resource displays
as a link than can be selected to list configuration and network address information in greater
detail.
Defines the operational state of each listed critical resource VLAN interface (either Up or
Down).
Provides an error status as to why the critical resource is not available over its designated
VLAN.
Displays the operational mode of each listed critical resource.
Select the Refresh button to update the screen's statistics counters to their latest values.
menu from the Web UI.
from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its
Status.
used to poll for updates from critical resources and the
Configuring the RADIUS Server on page
Statistics 13 - 97
Source