Advanced Profile Configuration - Motorola WiNG 5.5 Reference Manual

5 - 160 WiNG 5.5 Access Point System Reference Guide
• Disable Dynamic Chain Selection (radio setting). The default value is enabled. This setting is disabled from the Command
Line Interface (CLI) using the
on page 5-222.
• Disable A-MPDU Aggregation if the intended vehicular speed is greater than 30 mph. For more information, see
Override Configuration on page

5.2.13 Advanced Profile Configuration

System Profile Configuration
An access point profile's advanced configuration is comprised of defining connected client load balance settings, a MINT
protocol configuration and miscellaneous settings (NAS ID, access point LEDs and RF Domain Manager).
To set an access point profile's advanced configuration:
1. Select the Configuration tab from the Web UI.
2. Select Devices.
3. Select System Profile
4. Expand the Advanced
The following items are available as advanced access point profile configuration options:
• Advanced Profile Client Load Balancing
• Configuring MINT Protocol
• Advanced Profile Miscellaneous Configuration
dynamic-chain-selection
5-222.
from the options on left-hand side of the UI.
menu item.
command, or, in the UI (refer Radio Override Configuration
Radio