Motorola WiNG 5.5 Reference Manual page 596

8 - 26 WiNG 5.5 Access Point System Reference Guide
6. If adding a new
7. Define the following parameters for the MAC Firewall Rule:
Allow
Source MAC /
Destination MAC
Action
Figure 8-16 MAC Firewall Rules screen - Adding a new rule
MAC Firewall Rule, provide a name up to 32 characters in length.
Every MAC firewall rule is made up of matching criteria rules. The action defines what to
do with the packet if it matches the specified criteria. The following actions are supported:
• Deny - Instructs the firewall to not to allow a packet to proceed to its destination.
• Permit - Instructs the firewall to allow a packet to proceed to its destination.
Enter both Source MAC and Destination MAC addresses. Access points use the source IP
address, destination MAC address as basic matching criteria. Provide a subnet mask if
using a mask.
The following actions are supported:
• Log - Events are logged for archive and analysis.
• Mark - Modifies certain fields inside the packet and then permits them. Therefore, mark
is an action with an implicit permit.
• VLAN 802.1p priority.
• DSCP bits in the IP header
• Mark, Log - Conducts both mark and log functions.