Device - Motorola WiNG 5.5 Reference Manual

13.3.2 Device

Access Point Statistics
The Device screen displays basic information about the selected access point. Use this screen to gather version information,
such as the installed firmware image version, the boot image and upgrade status.
To view the device statistics:
1. Select the Statistics
2. Select System
connected access points.
3. Select Device.
The System field displays the following:
Model Number
Serial Number
Version
Boot Partition
Fallback Enabled
Fallback Image
Triggered
menu from the Web UI.
from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its
Figure 13-32 Access Point - Device screen
Displays the model of the selected access point to help distinguish its exact SKU and country
of operation.
Displays the numeric serial number set for the access point.
Displays the software (firmware) version on the access point.
Displays the boot partition type.
Displays whether this option is enabled. This method enables a user to store a known legacy
version and a new version in device memory. The user can test the new software, and use an
automatic fallback, which loads the old version on the access point if the new version fails.
Displays whether the fallback image was triggered. The fallback image is an old version of a
known and operational software stored in device memory. This allows a user to test a new
version of software. If the new version fails, the user can use the old version of the software.
Statistics 13 - 57