Motorola WiNG 5.5 Reference Manual page 254

5 - 168 WiNG 5.5 Access Point System Reference Guide
IPSec GW
12. Select the VLAN
The VLAN tab displays the VLAN, Routing Level, Link Cost, Hello Packet Interval and Adjacency Hold Time managed devices
use to securely communicate amongst one another.
13. Select Add to create a new VLAN link configuration or
Define either an IP address or hostname for the IPSec gateway.
tab to display the link IP VLAN information shared by the devices managed by the MINT configuration.
Figure 5-105 Advanced Profile Configuration - MINT Protocol screen - VLAN tab
NOTE: If creating a mesh link between two access points in Standalone AP mode, you
will need to ensure a VLAN is available to provide the necessary MINT link between the
two Standalone APs.
Edit to modify an existing configuration.