Motorola WiNG 5.5 Reference Manual page 497

• When a preconfigured interval has elapsed since the last frame, not necessarily the final frame, - of a set of frames to
be aggregated - was received.
In this enhancement to the standard frame aggregation, the time delay for aggregation is set individually for each traffic
class. For example, voice traffic might not be aggregated but sent immediately, whereas, background data traffic is set a
time delay for aggregating frames and these aggregated frames are sent.
Smart Aggregation
Max Delay for Best Effort
Max Delay for
Background
Max Delay for Streaming
Video
Max Delay for Video
Conferencing
Max Delay for Voice
Minimum frames per
Aggregate limit
Max Mesh Links
21. Select OK to update radio QoS multimedia optimization settings Select
Select to enable Smart Aggregation and dynamically set the time when an aggregated
frame is transmitted.
Specify the maximum time in milliseconds to delay best effort traffic. The default setting
is 150 millisecond.
Specify the maximum time in milliseconds to delay background traffic. The default setting
is 250 millisecond.
Specify the maximum time in milliseconds to delay streaming video traffic. The default
setting is 150 millisecond.
Specify the maximum time in milliseconds to delay video conferencing traffic. The default
setting is 40 millisecond.
Specify the maximum time in milliseconds to delay voice traffic. The default setting is 0
millisecond.
Specify the minimum number of frames to aggregate in a frame before it is transmitted.
The default setting is 8 frames.
Specify the maximum number of mesh links for Smart Aggregation. The default setting is
3.
Wireless Configuration 6 - 71
Reset to revert to the last saved configuration.