Table of Contents
Advertisement
5 - 332 WiNG 5.5 Access Point System Reference Guide
Max confirmed
Neighbors
Minimum signal
strength for smart-rf
neighbors
15. Select
MINT Protocol.
Figure 5-213 Device Overrides - Advanced Profile Overrides MINT screen - Settings tab
16. Refer to the
Area Identifier
configuration.
Level 1 Area ID
17. Define or override the following
Designated IS Priority
Adjustment
18. Select the
Latency of Routing Recalculation
control used for defining or overriding a latency period from 0 - 60 seconds. The default setting has the option disabled.
Use the spinner to set the maximum number of learned neighbors stored at this device.
Use the spinner to set the minimum signal strength of neighbor devices that are learnt
through Smart RF before being recognized as neighbors.
The MINT Protocol screen displays the
field to define or override the Level 1 and Level 2 Area IDs used by the profile's MINT
Select this option to enable a spinner control for setting the Level 1 Area ID from 1 -
4,294,967,295. The default value is disabled.
Priority Adjustment
Use the spinner control to set a Designated IS Priority Adjustment setting from -255 -
+255. This is the value added to the base level DIS priority to influence the Designated
IS (DIS) election. A value of +1 or greater increases DISiness. The default setting is 0.
option (within the Shortest Path First (SPF) field) to enable the spinner
Settings
tab by default.
settings:
Hide quick links:
Advertisement
Table of Contents
