Motorola WiNG 5.5 Reference Manual page 773

Neighbor MP ID
Neighbor IFID
Root MP ID
Is Root
Mobility
Radio Interface
Mesh Root Hops
Resourced
Link Quality
Link Metric
Root Metric
The MAC Address that the device uses to define the mesh point in the device that the
neighbor is a part of. It is used to distinguish the device that is the neighbor.
The MAC Address used by the interface on the neighbor device to communicate with this
device. This may define a particular radio or Ethernet port that communicates with this
device over the mesh.
The MAC Address of the neighbor's root mesh point.
A root mesh point is defined as a mesh point that is connected to the WAN and provides
a wired backhaul to the network. Yes if the mesh point that is the neighbor is a root mesh
point or No if the mesh point that is the neighbor is not a root mesh point.
Displays whether the mesh point is a mobile or static node. Displays True when the device
is mobile and False when the device is not mobile.
This indicates the interface that is used by the device to communicate with this neighbor.
The values are 2.4 and 5.0, indicating the frequency of the radio that is used to
communicate with the neighbor.
The number of devices between the neighbor and its root mesh point. If the neighbor is a
root mesh point, this value will be 0. If the neighbor is not a root mesh point but it has a
neighbor that is a root mesh point, this value will be 1. Each mesh point between the
neighbor and its root mesh point is counted as 1 hop.
Displays whether the mesh point has been resourced or not. The Mesh Connex neighbor
table can contain more neighbors than the AP supports. If the neighbor is resourced, it will
take away a one of the resources for a wireless client device to be used for meshing.
Displays True when the device is resourced and False when the device is not.
An abstract value depicting the quality of the mesh link between the device and the
neighbor. The range is from 0 (weakest) to 100 (strongest).
This value shows the computed path metric from the device to the neighbor mesh point
using this interface. The lower the number the better the possibility that the neighbor will
be chosen as the path to the root mesh point.
The computed path metric between the neighbor and their root mesh point.
Statistics 13 - 35