Motorola WiNG 5.5 Reference Manual page 600

8 - 30 WiNG 5.5 Access Point System Reference Guide
9. Select OK to update the settings. Select
at any point in the configuration process by selecting
access point user interface.
10. Select the WIPS Events
configuration parameters. This option need to remain selected to apply the WIPS configuration to the access point profile.
The Excessive
The Excessive
disable event filtering and set the thresholds for the generation of the event notification and filtering action.
An Excessive Action Event is an event where an action is performed repetitively and continuously. DoS attacks come under
this category. Use the
triggered.
11. Set the following
Name
Reset
tab. Ensure the Activate Wireless IPS Policy
tab displays by default, with additional
Figure 8-18 Wireless IPS screen - WIPS Events - Excessive tab
tab lists events with the potential of impacting network performance. An administrator can enable or
Excessive Actions Events
Excessive Action Event
Displays the name of the excessive action event representing a potential threat to the
network. This column lists the event being tracked against the defined thresholds set for
interpreting the event as excessive or permitted.
to revert to the last saved configuration. The WIPS policy can be invoked
Activate Wireless IPS Policy
MU Anomaly and
table to select and configure the action taken when events are
configurations:
from the upper, left-hand side, of the
option remains selected to enable the screen's
AP Anomaly tabs also available.