Motorola WiNG 5.5 Reference Manual page 67

3.1.2.4 Radio Configuration
Advanced Setup Wizard
Use the Radio Configuration
as a dedicated sensor.
NOTE: The Radio Configuration screen displays separate configurable fields for each
access point radio. Supported access point models can have from one to three (AP7131)
radios. The
of the radios has been dedicated as a sensor.
Figure 3-18 Initial Setup Wizard - Radio Configuration screen of the Advanced Setup Wizard
1. Set the following for each radio:
• Configure as a Data Radio
or 5.0 GHz radio band.
• Radio Frequency Band
The selected band is used for WLAN client support. Consider selecting one radio for 2.4 GHz and another for
5.0 GHz support (if using a dual or three radio model) when supporting clients in both the 802.11bg and 802.11n bands.
• Power Level
screen to define radio support for the 2.4 GHz radio band, 5.0 GHz radio band or set the radio
ADSP Sensor Server
- Select this option to dedicate this radio to WLAN client support in the selected 2.4 GHz
- Select the 2.4 GHz or 5.0 GHz radio band to use with the radio when selected as a Data Radio.
- Use the spinner control to select a 1 - 23 dBm minimum power level to assign to this radio in selected
field displays at the bottom of the screen only if one
Quick Start 3 - 29