Motorola WiNG 5.5 Reference Manual page 838

13 - 100 WiNG 5.5 Access Point System Reference Guide
2. Select System
connected access points.
3. Select Dot1x
4. Refer to the following
AAA Policy
Guest Vlan Control
System Auth Control
5. Review the following
Name
Auth SM
Auth VLAN
from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its
from the left-hand side of the UI.
Figure 13-63 Access Point – Dot1x screen
Dot1xAuth statistics:
Lists the AAA policy currently being utilized for authenticating user requests.
Lists whether guest VLAN control has been allowed (or enabled). This is the VLAN traffic is
bridged on if the port is unauthorized and guest VLAN globally enabled. A green checkmark
designates guest VLAN control as enabled. A red X defines guest VLAN control as disabled.
Lists whether Dot1x authorization is globally enabled for the access point. A green checkmark
designates Dot1x authorization globally enabled. A red X defines Dot1x as globally disabled.
Dot1x Auth Ports utilization information:
Lists the access point ge ports subject to automatic connection and authentication using
Dot1x.
Lists the current authentication state of the listed port.
Lists the virtual interface utilized post authentication.