Motorola WiNG 5.5 Reference Manual page 171

26. Use the Inbound IP Firewall Rules
route.
Either select an existing IP firewall policy or use the default set of IP firewall rules. The firewall inspects OSPF route traffic
flows and detects potential attacks on the dynamic route not visible to traditional wired firewall appliances. Select the
Create icon to define a new set of IP firewall rules that can be applied to the OSPF route configuration. Selecting
allows for the modification of an existing IP firewall rules configuration. For more information, see
page 8-2.
27. Use the VPN Crypto Map
Crypto Map entries are sets of configuration parameters for encrypting packets passing through the VPN Tunnel. If a Crypto
Map configuration does not exist suiting the needs of this virtual interface, select the
Map configuration or the
28. Select OK to save the changes to the OSPF route security configuration. Select
configuration.
Figure 5-47 Network - OSPF Virtual Interface - Security tab
drop-down menu to select the IP access and deny rules to apply to the OSPF dynamic
drop-down menu to select and apply a VPN crypto map entry to apply to the OSPF dynamic route.
Edit icon to modify an existing configuration.
Device Configuration 5 - 85
Wireless Firewall on
Create icon to define a new Crypto
Reset to revert to the last saved
Edit