User Mode Related To Fixing Grade - Canon imageRUNNER 2530 Service Manual

2
Technology > Fixing System > Controls > User mode related to fixing grade

User mode related to fixing grade

The fixing grade is affected by some special modes in user mode which change the control
temperature or productivity. The related modes are as follows.
User mode Summary
Special Mode N The fixing mode is
changed when either
(To prevent a curl
of the plain/ recycled/
and jam in high
color/ 3-hole paper is
humidity)
selected in the control
panel. The productivity
is reduced and fixing
grade is improved.
Special Mode P The fixing mode is
changed when either
(To prevent a curl
of the plain/ recycled/
of thin paper/
color/ 3-hole paper is
recycle paper)
selected in the control
panel. The productivity
is reduced and fixing
grade is improved.
Special Mode G The productivity is
reduced and fixing
(To increase the
grade is improved.
fixing grade for
heavy paper)
Special Mode G
The down sequence
time is reduced
(To increase the
when switching the
productivity during
paper size. The fixing
down sequence)
grade is reduced and
productivity is improved.
(*3)
Special Mode F The down sequence
time is reduced in the
(To reduce the
collation adjustment
wait time during
mode. The fixing
rotation/ collation
grade is reduced and
adjustment mode)
productivity is improved.
2 Technology > Fixing System > Controls > User mode related to fixing grade
Setting value Temperature control/productivity
Off Normal temperature control
(Default) (Plain paper mode)
Auto (Fixing grade Fixing mode (plain paper mode
is improved) and N1 mode (*1)) is changed
automatically according to the
environment (temperature/
humidity).
Manual (Medium) N1 mode temperature control
(Fixing grade is
improved)
Manual (High) N3 mode (*3) temperature control
(Fixing grade is
improved)
Off Normal temperature control
(Default) (Plain paper mode)
Medium Thin paper mode temperature
(Fixing grade is control
improved)
High S-thin paper mode temperature
(Fixing grade is control
improved)
Off Normal control
(Default)
On The productivity is reduced by 4
(Fixing grade is sheets or 5 sheets.
improved)
Off Temperature difference between
(Default) the main and sub thermistors to
start the paper feeding: 20 deg C
On Temperature difference between
(Productivity is the main and sub thermistors to
improved) start the paper feeding: 30 deg C
Image Priority Temperature difference between
(Default) the main and sub thermistors to
start the paper feeding: 20 deg C
Speed Priority 1 Temperature difference between
(Productivity is the main and sub thermistors to
improved) start the paper feeding: 40 deg C
Speed Priority 2 Temperature difference between the
(Productivity is main and sub thermistors to start
improved more) the paper feeding: 60 deg C
*1. N1 mode: "Normal temperature control" -15 deg C (when the cassette feeding, and the
fixing temperature is 100 deg C or more at the start of warm-up control.)
*2. N3 mode: "Normal temperature control" -48 deg C (when the cassette feeding, and the
fixing temperature is 100 deg C or more at the start of warm-up control.)
*3. The setting of rotation/collation mode is given priority to over this setting.
T-2-28 T-2-28
2-50
2-50