Service Operations; Action To Take When Replacing Parts; Consumables; Service Precautions - Canon imageRUNNER 2530 Service Manual

2
Technology > Controller System > Service Operations > Service precautions
Heater operating condition
Turning on the Standby mode
environment heater
Printing
switch
Turning off the main power switch
Sleep mode
2 Technology > Controller System > Service Operations > Service precautions
Cassette Reader Drum
heater heater heater
ON OFF ON
ON OFF OFF
ON ON ON
ON ON ON
T-2-11 T-2-11

Service Operations

Action to take when replacing parts

Part name
Secondary battery The secondary battery is powered even after the
main power switch is turned off.
SO-DIMM
1) Press the SW3 on the main controller.
2) The LED10 on the main controller goes out.
3) Now, you can replace parts.
Main controller PCB Print the set/loaded data.
Install the parts (removed from the old PCB) on the
new PCB. Set/load data again.

Consumables

None.

Service precautions

None.
2-27
Action Reference
Refer to page
4-41
Refer to page
4-41
T-2-12 T-2-12
2-27