4
Parts Replacement and Cleaning > Main Units/Parts > Removing the CIS Unit
Action to Take after Replacement
MEMO:
The service parts for toner supply unit do not come with a bottle ring. Remove the
bottle ring from the old toner supply unit and attach it to the new one.
The procedure is as follows:
1) Remove the toner bottle set lever.
•
1 parallel pin
2) Remove the bottle base.
•
1 screw
•
1 claw
x1
x1
爪
4
Parts Replacement and Cleaning > Main Units/Parts > Removing the CIS Unit
3)Remove the bottle ring.
Removing the CIS Unit
1) Open the platen (ADF/platen board cover).
2) Remove the reader rear
3) Remove the reader
4) Remove the right glass retainer.
5) Remove the platen
6) Move the belt in the arrow direction and then the CIS unit to the groove position of the
frame.
F-4-58
F-4-58
F-4-59
F-4-59
cover.("Removing the Reader Rear Cover"(page 4-19).
right.("Removing the Reader Right Cover"(page 4-19).
glass.("Removing the Platen Glass"(page 4-19).
4-30
F-4-60
F-4-60
)
)
)
F-4-61
F-4-61
4-30