Canon imageRUNNER 2530 Service Manual page 263

21) Using the harness cover (lids), secure the repeating harness B to
the harness covers (bases).
23) Attach the rear cover (left) using the 2 screws.
24) Attach the rear cover (right) using the 3 screws.
CAUTION:
Put the repeating harness in
the cut portion of the rear cover
(right).
9
Installation > Card Reader Installation Procedure > Installation Procedure
22) Using a nipper, remove the precut portion [1] of the rear cover (left) as shown below.
CAUTION:
Finish the surface of the cut
part of the cover to remove
burrs.
F-9-61 F-9-61
9 Installation > Card Reader Installation Procedure > Installation Procedure
F-9-63 F-9-63
9-27
F-9-62 F-9-62
9-27