Canon imageRUNNER 2530 Service Manual page 268

4) Install the RS Conversion PCB on the RS232C Support Plate.
•
4 Screws (TP: M3x6)
x4
6) Insert the CV-Serial Relay Cable included in the package to the 2
connectors on the PCB of the host machine.
x2
9
Installation > Serial Interface Kit-J2 Installation Procedure > Installation Procedure
5) Remove the Controller plate.
•
3 Screws
F-9-71 F-9-71
7) Connect the RS Conversion PCB and the CV-Serial Relay Cable, and install the RS232C Support Plate by aligning the
2 Protrusions on the plate with the Holes on the host machin.
•
2 Screws (TP: M3x6)
•
2 Protrusions
•
2 Holes
F-9-73 F-9-73
9 Installation > Serial Interface Kit-J2 Installation Procedure > Installation Procedure
x3
x2
32
F-9-72 F-9-72
Protrusion
Hole
Hole
Protrusion
F-9-74 F-9-74
32