4
Parts Replacement and Cleaning > Main Units/Parts > Removing the Right Cover Unit
7) Remove the connection cable.
2 connectors (The machine without the No.2 delivery unit does not have the upper
connector.)
CAUTION:
Be sure to disconnect the upper connector after releasing the harness from the clamp
to prevent breaking of wire.
8)Remove one screw.
x2
x1
9)Remove two screws.
x2
4
Parts Replacement and Cleaning > Main Units/Parts > Removing the Right Cover Unit
10)Remove the right cover.
MEMO:
If the right cover is removed with it open widely, it touches the reader right cover. Open
the right cover to the angle shown below, and then remove it so that it does not touch
the reader right cover.
F-4-45
F-4-45
F-4-46
F-4-46
4-24
F-4-47
F-4-47
4-24