Canon imageRUNNER 2530 Service Manual page 312

12) Remove the rear cover (right).
•
Screws (3 pcs.)
•
Claws (2 pcs.)
x3
x2
Claws
14) Detach all the connectors at the place shown in the figure. (This is performed only when the optional
cassette unit is installed.)
9
Installation > Drum Heater-C1 Installation Procedure > Installation Procedure
13) Remove the connector cover.
•
Screw (1 pc.)
F-9-175
15) Remove 1 screw (RS tight: M3) and release 1 claw to detach the rear cover (lower).
•
Screw (1 pc.)
•
Claw (1 pc.)
F-9-177
9 Installation > Drum Heater-C1 Installation Procedure > Installation Procedure
x1
x1
x1
Claw
9-76
F-9-176
F-9-178
9-76