3) Remove the screw from the card reader.
x1
5) Insert the card reader harness and ground cable into the hole in the supplied card reader mount.
Using the screw removed in step 4), secure the card reader to the card reader mount.
x1
Card reader
9
Installation > Card Reader Installation Procedure > Installation Procedure
4) Remove the screw and the tooth washer securing the ground cable, and then separate the card reader from the card reader mount. The removed card
reader mount is no longer necessary.
CAUTION:
When removing the harness
through the opening in the card
reader mount, take care not to
cut or damage it.
F-9-45
F-9-45
Card reader mount
F-9-47
F-9-47
9
Installation > Card Reader Installation Procedure > Installation Procedure
x1
Card reader mount
6) Connect the ground cable [2] to the reader mount using the bundled binding screw (M4x6).
7) Attach the supplied edge saddle to the card reader mount.
x1
9-23
Card reader
F-9-46
F-9-46
F-9-48
F-9-48
9-23