Fixing System; Overview; Features; Specifications - Canon imageRUNNER 2530 Service Manual

2
Technology > Fixing System > Overview > Specifications

Fixing System

Overview

Features

This machine introduces the on-demand fixing method.
Separation guide
Fixing heater
Fixing film
2 Technology > Fixing System > Overview > Specifications
Fixing delivery roller
Cleaning roller
Fixing inlet guide Pressure roller
F-2-68 F-2-68

Specifications

Item
Fixing method On-demand fixing
Fixing speed
139mm/sec (1/1-high speed: 0.8% speed-up)
137mm/sec (1/1-speed)
133mm/sec (1/1-slow speed: 3.1% speed-down)
Fixing heater Ceramic heater
Control temperature 208 deg C (plain paper) *1
Temperature detection By the main thermistor and the sub thermistor
Cleaning mechanism
Cleaning roller
Edge heat rising prevention
Down sequence control
control
Fixing loop control Loop sensor
Protective Function Main thermistor and Sub thermistor
Thermo Switch (operating temperature: 250 deg C)
*1. Target temperature is specified depending on the fixing mode and the fixing temperature
at the start of warm-up control.
2-43
Function/method
T-2-23 T-2-23
2-43