Removal Of Parts From Reader; Installation Of Reader Heater (For Ir2530/2525/2520 Series) - Canon imageRUNNER 2530 Service Manual

Removal of Parts from Reader

1)Open the ADF (or platen Cover).
2)Remove 2 screws to detach the glass retainer (right).
3)Remove the platen glass.
x2

Installation of Reader Heater (for iR2530/2525/2520 series)

1)Move the drive belt in the arrow direction to shift the CIS to the center.
2)Turn up the sheet.
9
Installation > Reader Heater Unit-H1 Installation Procedure > Installation Procedure > Installation of Reader Heater (for iR2530/2525/2520 series)
F-9-122 F-9-122
3)Joint the 1 connector and install the heater (left) with 1 screw.
x1
x1
F-9-123 F-9-123
9 Installation > Reader Heater Unit-H1 Installation Procedure > Installation Procedure > Installation of Reader Heater (for iR2530/2525/2520 series)
x1
9-56
F-9-124 F-9-124
9-56