Installation Procedure
1) Remove the rear cover (right).
•
Screws (3 pcs.)
•
Claws (2 pcs.)
x3
x2
Claws
3) Remove the rear-left cover.
•
Screws (3 pcs.)
x3
9
Installation > Control Interface Cable-A1 Installation Procedure > Installation Procedure
2) Remove one screw and then the rear-left blanking cover.
•
Screw (1 pc.)
F-9-75
F-9-75
4) Remove the controller cover.
•
Screws (3 pcs.)
F-9-77
F-9-77
9
Installation > Control Interface Cable-A1 Installation Procedure > Installation Procedure
x3
9-35
F-9-76
F-9-76
F-9-78
F-9-78
9-35