13) Attach the card reader to the reader.
•
If iR2545/2535 series: bundled 2 TP screws (M4x6)
•
If iR2535/2530/2525 series: bundled 2 TP screws (M4X16)
x2
15) Secure the card reader cover using the bundled binding screw
(M4x6).
x1
9
Installation > Card Reader Installation Procedure > Installation Procedure
14) Slide the card reader cover to attach it to the card reader mount.
F-9-53
F-9-53
16) Affix the bundled harness cover (bases) at the right rear of the
machine with it aligned with the bottom line of the reader as the
figure below.
F-9-55
F-9-55
9
Installation > Card Reader Installation Procedure > Installation Procedure
CAUTION:
Route the repeating wire B as shown below.
17) Attach the 2 bundled clamps at the position shown in the Figure.
F-9-56
F-9-56
9-25
F-9-54
F-9-54
F-9-57
F-9-57
9-25