b.Affixing the ADF Label (only for the standard model with
an ADF)
3) Affix the document size label [A] of the suitable paper size series to the feeder cover in such a manner that the marks
on the side guide (front) are aligned with the corresponding marks on the document size label when viewed by the
user.
9
Installation > Making Pre-Checks > Selecting the Site of Installation
1) If the following labels are supplied,
2) Align the side guide (rear) with the A4/A3 mark.
go through the steps described
below.
•
Document size label
•
Finger pinch caution label 1
•
Finger pinch caution label 2
F-9-29
F-9-29
9
Installation > Making Pre-Checks > Selecting the Site of Installation
A4/A3
F-9-28
F-9-28
9-15
9-15