Serial Interface Kit-J2 Installation Procedure
Checking the Contents
[1] RS Conversion PCB x 1
[2] RS232C Support Plate x 1
* NCU-MJB Cable (CV accessory) is not used with this equipment.
Points to Note before Installation
Turning OFF the Host Machine
Turn OFF the main power switch on the host machine, and then remove the power plug from the outlet.
9
Installation > Serial Interface Kit-J2 Installation Procedure > Points to Note before Installation > Turning OFF the Host Machine
[3] CV-Serial Relay Cable x 1
9
Installation > Serial Interface Kit-J2 Installation Procedure > Points to Note before Installation > Turning OFF the Host Machine
[4] NCU-MJB Cable
[5] TP Screws (M3X6) x 6
(CV accessory) x 1
30
30