Canon imageRUNNER 2530 Service Manual page 315

20) Remove 1 screw to detach the blindfold cover.
•
Screw (1 pc.)
22) Detach all the connectors on the power supply unit and remove 3 screws to dismount the power
supply unit.
x3
9
Installation > Drum Heater-C1 Installation Procedure > Installation Procedure
21) Remove the left rear cover.
•
Screws (3 pcs.)
F-9-184
23) Mount 2 supplied wire saddles and 1 supplied edge saddle on the rear frame.
F-9-186
9 Installation > Drum Heater-C1 Installation Procedure > Installation Procedure
x3
9-79
F-9-185
F-9-187
9-79