Canon imageRUNNER 2530 Service Manual page 75

2
Technology > Fixing System > Controls > Print temperature control
C.Sheet-to-sheet distance temperature control
To prevent the excessive temperature rise and to save the power consumption, the
target temperature is set 5 deg C low (in case of plain paper *1) from the printing
temperature.
*1. Set to 5, 15 or 20 deg C low according paper type
2 Technology > Fixing System > Controls > Print temperature control
Target temperature during printing
The control temperature is determined according to the fixing mode or to the fixing
temperature at the start of warm-up control. The 12 modes are provided as the fixing mode
for the selected feed table and paper type.
The following table is the control temperature when the fixing temperature is less than 55
deg C at the start of warm-up control.
Fixing mode Setting
1-sided/first of 2-sided
Paper type
Plain paper
208
Thin paper
198
S-thin paper 188
Heavy paper 223
Heavy paper-H 223
Bond paper 23
OHP
198
Postcard
223
S-Postcard 223
Envelope 223
N1 165
N3 155
Related Service Mode
Offset of fixing control temperature (High and low of control temperature)
PRINT > SW
> 62 (Control temperature during cassette feeding)
> 63 (Control temperature in Heavy/Heavy-H/Bond paper modes)
> 166 (Control temperature for the second side of 2-sided copying)
> 173 (Control temperature for the second side of 2-sided copying)
> 179 (Control temperature in Postcard/S-Postcard/Envelope modes)
<Setting value>
0 to 2: +15 deg C
3 to 11: +12 to -15 deg C (each 3 deg C) [Default: 7]
12 to 14: -15 deg C
2-47
Target temperature (deg C)
Second of 2-sided
203
193
183
223
223
223
198
---
---
---
165
155
T-2-25 T-2-25
2-47