Installation Of Reader Heater (For Ir2545/2535 Series) - Canon imageRUNNER 2530 Service Manual

4)Joint 1 connector and install the heater (right) with 1 screw.
x1
x1
x1

Installation of Reader Heater (for iR2545/2535 series)

1)Move the drive belt in the arrow direction to shift the D unit to the center.
9
Installation > Reader Heater Unit-H1 Installation Procedure > Installation Procedure > Installation of Reader Heater (for iR2545/2535 series)
5)Restore the following parts:
Platen glass
Glass retainer (right)
Rear lower cover
Connector cover
Left rear cover
Left rear blindfold
cover
Rear cover (left)
Rear cover (right)
F-9-125 F-9-125
2)Install the 2 supplied wire saddles (small).
3)Joint 1 connector and install the heater (left) with 1 screw.
x2
F-9-126 F-9-126
9 Installation > Reader Heater Unit-H1 Installation Procedure > Installation Procedure > Installation of Reader Heater (for iR2545/2535 series)
6)Turn the switch of the heater power ON.
2 screws
1 screw
1 screw
3 screws
1 screw
3 screws
2 screws
x1
x1
9-57
F-9-127 F-9-127
9-57