Canon imageRUNNER 2530 Service Manual page 273

9) Cut the blindfold cover from the rear-left cover using nippers.
F-9-82 F-9-82
CAUTION:
Be sure to remove the remaining edges with care not to
damage the harness.
9
Installation > Control Interface Cable-A1 Installation Procedure > Installation Procedure
10) Install the controller cover.
11) Pass the control card cable in the opening made as mentioned above, and then
install the rear-left cover.
9 Installation > Control Interface Cable-A1 Installation Procedure > Installation Procedure
12) Install the removed cover.
Rear-left blindfold cover
Rear cover (right)
F-9-83 F-9-83
9-37
9-37