4) Affix the supplied finger pinch caution label 1 written in an appropriate language.
c.Affixing Labels to the
1) If the following labels are
Reader
supplied, go through the
steps described below.
•
Copy inhibition
label
•
Glass cleaning/
lamp caution label
•
Lamp caution label
9
Installation > Making Pre-Checks > Selecting the Site of Installation
5) Open the DADF.
6) Affix the supplied finger pinch caution label 2 written in an appropriate language.
F-9-30
F-9-30
2) Open the pressure plate/DADF.
3) Affix the copy inhibition label [A] (written in an appropriate language) to the existing label.
4) Affix the glass cleaning/lamp caution label or lamp caution label [B] written in an appropriate language to the existing label. (The label written in
English is factory-affixed.)
9
Installation > Making Pre-Checks > Selecting the Site of Installation