Canon imageRUNNER 2530 Service Manual page 298

5) Install the Wire Saddle to Heater Connector Cover.
7) IInstall the Cassette Heater Unit by fitting the3 hooks to the holes .At that time, put the connector through the
square hole.
Cassette Heater Unit
9
Installation > Cassette Heater Unit 37 > Installation Procedure > In case of Options(Cassette Module)
6) Put the connector of the heater through the Wire Saddle and install the Heater Connector Cover.
•
1 Screw (P tight;
M3x8)
•
1 Wire saddle
F-9-133
Cassette Heater Unit
Base plate
9 Installation > Cassette Heater Unit 37 > Installation Procedure > In case of Options(Cassette Module)
8) Connect the cassette heater unit with the stubby driver.
•
1 Screw (W sems round end; M3x6)
F-9-135
F-9-134
F-9-136
9-62
9-62