ACH550-01 User's Manual
The figure below shows an example of correct wiring.
Control cable
90°
min. 200 mm [8 in]
Input power cable
Note: If an motor safety switch or contactor is used, supply
either 2102
START ENABLE
ACH550.
Note: Wiring is discussed in more detail in chapter
drive.
Preparing for installation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
min. 300 mm [12 in]
Motor cable
[value must be 1 (
STOP FUNCTION
1 from an auxiliary contact of the isolator to the
Control cable
min. 500 mm [20 in]
)] or 1608
COAST
Installing the
27