Table of Contents
Advertisement
Code Description
1603 PASS CODE
Entering the correct pass code allows you to change the parameter
lock.
• See parameter 1602 above.
• Code 358 allows you to change the value of parameter 1602 once.
• This entry reverts back to 0 automatically.
1604 FAULT RESET SEL
Selects the source for the fault reset signal. The signal resets the drive
after a fault trip if the cause of the fault no longer exists.
0 =
– Defines the control panel as the only fault reset source.
KEYPAD
• Fault reset is always possible with control panel.
1 =
1 – Defines digital input
DI
• Activating the digital input resets the drive.
2...6 =
2...
DI
• See
1 above.
DI
7 =
/
START
STOP
• Do not use this option when fielbus communication provides the
start, stop and direction commands.
8 =
– Defines the fieldbus as a fault reset source.
COMM
• The Command Word is supplied through fieldbus communication.
• The bit 4 of Command Word 1 (parameter 0301) resets the drive.
-1 =
1(
) – Defines an inverted digital input
DI
INV
source.
• De-activating the digital input resets the drive.
-2...-6 =
2(
DI
as a fault reset source.
• See
1(
DI
INV
210
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1 as a fault reset source.
DI
6 – Defines digital input
DI
– Defines the Stop command as a fault reset source.
)...
6(
) – Defines an inverted digital input
INV
DI
INV
) above.
ACH550-01 User's Manual
Range
0...65535
-6...8
2...
6 as a fault reset source.
DI
DI
1 as a fault reset
DI
Parameter listing and descriptions
2...
6
DI
DI
Advertisement
Table of Contents
