Table of Contents
Advertisement
Code Description
3402 SIGNAL1 MIN
Defines the minimum expected value for the first display parameter.
• Use parameters 3402, 3403, 3406, and 3407, for example to convert
a group 01 parameter, such as 0102
conveyor driven by the motor (in ft/min). For such a conversion, the
source values in the figure are the min. and max. motor speed, and
the display values are the corresponding min. and max. conveyor
speed.
• Use parameter 3405 to select the proper units for the display.
Note: Selecting units does not convert values. Parameter is not
effective if parameter 3404
P 3407
3403 SIGNAL1 MAX
Defines the maximum expected value for the first display parameter.
Note: Parameter is not effective if parameter 3404
9 (
).
DIRECT
3404 OUTPUT1 DSP FORM
Defines the decimal point location for the first display parameter.
• Enter the number of digits desired to the right of the decimal point.
• See the table for an example using pi (3.14159).
3404 Value
0
1
2
3
4
5
6
7
8
9
258
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
OUTPUT
Display
value
P 3406
P3402
Display
+ 3
+ 3.1
+ 3.14
+ 3.142
3
3.1
3.14
3.142
Bar meter displayed.
Direct value. Decimal point location and units of
measure are identical to the source signal.
Note: Parameters 3402, 3403 and 3405...3407 are
not effective.
ACH550-01 User's Manual
Range
-
(in rpm) to the speed of a
SPEED
1
= 9 (
DSP FORM
DIRECT
Source
value
P 3403
-
OUTPUT
0...9
Range
-32768...+32767 (Signed)
0...65535 (Unsigned)
Parameter listing and descriptions
).
1
=
DSP FORM
Advertisement
Table of Contents
