ABB ACH550-UH-011A-6 User Manual page 156

ACH550-01 User's Manual
Code Description
5102 FB PAR 2...FB PAR 26
...
Refer to the communication module documentation for more
5126
information on these parameters.
5127 FBA PAR REFRESH
Validates any changed fieldbus parameter settings.
0 = – Refreshing done.
DONE
1 =
REFRESH
• After refreshing, the value reverts automatically to
5128 FILE CPI FW REV
Displays the CPI firmware revision of the drive's fieldbus adapter
configuration file. Format is xyz, where:
• x = major revision number
• y = minor revision number
• z = correction number.
Example: 107 = revision 1.07
5129 FILE CONFIG ID
Displays the revision of the drive's fieldbus adapter module's
configuration file identification.
• File configuration information depends on the drive application
program.
5130 FILE CONFIG REV
Contains the revision of the drive's fieldbus adapter module
configuration file.
Example: 1 = revision 1
5131 FBA STATUS
Contains the status of the adapter module.
0 = – Adapter not configured.
IDLE
1 =
EXECUT INIT
2 =
TIME OUT
the adapter and the drive.
3 =
CONFIG ERROR
• The major or minor revision code of the adapter's CPI firmware
revision differs from that stated in the drive's configuration file.
4 = - – Adapter is off-line.
OFF LINE
5 = - – Adapter is on-line.
ON LINE
6 = – Adapter is performing a hardware reset.
RESET
5132 FBA CPI FW REV
Contains the revision of the module's CPI program. Format is xyz,
where:
• x = major revision number
• y = minor revision number
• z = correction number.
Example: 107 = revision 1.07
Serial communications
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
– Refreshing.
– Adapter is initializing.
– A time-out has occurred in the communication between
– Adapter configuration error.
Range
0...65535
0=DONE, 1=REFRESH
.
DONE
0...0xFFFF
0...0xFFFF
0...0xFFFF
0...6
0...0xFFFF
151