Table of Contents
Advertisement
Group 04: FAULT HISTORY
This group stores a recent history of the faults reported by the
drive.
Code Description
0401 LAST FAULT
0 – Clear the fault history (on panel = NO RECORD).
n – Fault code of the last recorded fault.
• The fault code is displayed as a name. See section
page
371
for the fault codes and names. The fault name shown for
this parameter may be shorter than the corresponding name in the
fault listing, which shows the names as they are shown in the fault
display.
0402 FAULT TIME 1
Day on which the last fault occurred. Either as:
• Date if real time clock is operating.
• Number of days after power on if real time clock is not used, or was
not set.
0403 FAULT TIME 2
Time at which the last fault occurred. Either as:
• Real time, in format hh:mm:ss, if real time clock is operating.
• The time since power on (less the whole days reported in 0402), in
format hh:mm:ss, if real time clock is not used, or was not set.
0404 SPEED AT FLT
Motor speed (rpm) at the time the last fault occurred
0405 FREQ AT FLT
Frequency (Hz) at the time the last fault occurred
0406 VOLTAGE AT FLT
DC bus voltage (V) at the time the last fault occurred
0407 CURRENT AT FLT
Motor current (A) at the time the last fault occurred
0408 TORQUE AT FLT
Motor torque (%) at the time the last fault occurred
0409 STATUS AT FLT
Drive status (hex code word) at the time the last fault occurred
0410 DI 1-3 AT FLT
Status of digital inputs 1...3 at the time the last fault occurred
0411 DI 4-6 AT FLT
Status of digital inputs 4...6 at the time the last fault occurred
182
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
ACH550-01 User's Manual
Range
fault codes (control
panel displays as text)
date dd.mm.yy/
power-on time in days
time hh.mm.ss
-
-
-
-
-
-
000...111 (binary)
000...111 (binary)
Parameter listing and descriptions
Fault listing
on
Advertisement
Table of Contents
