NorthStar 972 Quickstart Manual And Reference Manual page 81

Reference Manual Revision B
Edit Route screen
3. If you want to change the route's name, do so
now.
Use
4. Press to change from chart-based edit-
ing to list-based editing.
5. Press ENTER.
You can alternate between list and chart
editing at any time.
Editing a route on the chart
The direction of the route is indicated by a
series of small arrows in each leg, and the
cursor is in the middle of the screen.
Editing from the chart is described below;
editing from a list of waypoints is described
in Editing a route using a waypoints list,
starting on page 78.
Editing a route using the chart
After you have accessed a route as
described above, you can add or remove
waypoints using the chart as follows:
Adding waypoints to a route
You can add waypoints to the end of a
route, or to the beginning, or the middle,
depending on the choice you make in step
Reference section 5 — Creating waypoints and routes
77
Editing a route