NorthStar 972 Quickstart Manual And Reference Manual page 74

Reference section 5 — Creating waypoints and routes
70
Editing waypoints
Waypoint "WH" selected
3. To edit the waypoint, press
Waypoints chart screen, the key is labelled
Edit waypt
.)
Edit Waypoint screen
The
Edit Waypoint
you to make changes just as if you were
entering a new waypoint. Press
when done.
Edit
. (On the
Erasing waypoints
To permanently erase the waypoint, press
Erase on the
ENTER
Updating waypoint coordinates
You can "fine tune" a waypoint's position
by actually sailing to the exact desired
position and setting the waypoint's stored
coordinates to your present position. You
screen appears, allowing
If the waypoint is in an active navplan, you
must stop navigating before editing it.
NOTE:
If you move the waypoint, any routes
containing this waypoint will be changed to
reflect the waypoint's new position.
A warning is displayed before any routes
are changed.
screen, then
Edit Waypoint
.
You can't erase a waypoint if it's used in a
route—you must first remove it from the
route. For details about editing routes, see
Editing a route, starting on page 76.
ENTER
Northstar 972