NorthStar 972 Quickstart Manual And Reference Manual page 147

Configuring the replacement as a master
To function in a network, the replacement
unit must be designated as a master unit.
To do this:
The unit will turn on and operate as a
master unit.
After the original master unit is restored,
the replacement unit should be set back to
slave status.
Any changes made to the database will be
lost when the unit is returned to the
master setting.
Reference Manual Revision B
1. Turn the unit on. When the animated
Northstar screen appears, press the STAR
key.
2. Follow the displayed instructions.
Reference section 10 — Networking
Restrictions
143