NorthStar 972 Quickstart Manual And Reference Manual page 2

This processor module must be handled with reasonable care and protected from the following;
Moisture: Do not mount this processor in unprotected areas of the vessel having moisture.
•
Vibration and shock: Use of the supplied shock/vibration mount is a mandatory part of the
•
installation. Only mount this unit in a horizontal position with adequate space for ventilation,
maintenance and for field service removal. Rough handling during removal or installation can
cause premature failure of internal components.
Radar interference: Do not install the processor or cabling in areas exposed to interference from
•
any radar. The processor should be mounted as far as possible below any source of radar
interference.
Flybridge installations of the processor are not recommended and should be avoided. Installations
in these areas require special provisions for shielding and the installation design must provide total
protection from any moisture.
Problems caused by moisture, vibration and radar interference are not covered by warranty. Refer
to the installation manual P/N GM972IM for additional installation, troubleshooting and warranty
information.
For advice regarding equipment placement, please consult with an authorized Northstar Servicing
Dealer before beginning the installation.
To locate a Northstar Servicing Dealer near you call 978-897-6600
Attention Installers: