NorthStar 972 Quickstart Manual And Reference Manual page 93

Transmitter control
When the radar image is displayed
full-screen by pressing the
menu key allows you to set the radar trans-
mitter to
Controlling radar
In order to control the radar from the
menu keys, the Control key (if displayed)
must indicate
If necessary, press the Control key repeat-
edly until it indicates
Rotating the radar image
Press Rotate repeatedly to choose the
screen rotation. You can choose north up,
course-up, heading-up, or leg-up. For more
information, see Changing radar scale and
rotation, on page 90.
Adjusting the radar
Press the Adjust radar... key to access
several pages of radar adjustments. For
more information about using these keys,
see Using the Adjustment keys, on page 91.
Reference Manual Revision B
RADAR
or .
Standby On
.
Radar
.
Radar
Using the radar markers
Press Adjust Markers... to display the
key, a controls for the 972's electronic bearing
line (EBL), variable range marker (VRM),
and guard zone. For more information
about using these keys, see Using the
Markers keys, starting on page 94.
Viewing more info
Press More info to display an "info bar" at
the bottom of the screen. Each additional
press of More info shows the following
information:
your vessel's present
•
Speed-Over-Ground (SOG),
Course-Over-Ground (COG), and
heading (HDG)
your vessel's distance (dist) and bearing
•
(brg) to the current waypoint, if any,
along with a steering indicator
your vessel's position in lat/lon (or TDs,
•
if enabled)
tide and current information
•
Using the radar's main menu keys
Reference section 6 — Radar
89