NorthStar 972 Quickstart Manual And Reference Manual page 41

store a position fix as a point in your wake
and the length of the wake in minutes.
To show the
Wake control on the
To change any of these options, use the
cursor pad to move the arrow to the field
you want to change, then press Edit. Press
the cursor pad to display the option you
want. Press
Enable Wake
Set to
Set to
Reference Manual Revision B
screen, press
Wake Display
Chart Options
Wake Control screen
to lock in the selection.
ENTER
to display the wake.
On
to turn it off.
Off
Wake point every
You can choose among the following
options for point display, and the corre-
screen. sponding track length:
every 1 second
•
every 2 seconds
•
every 4 seconds
•
every 8 seconds
•
every 20 seconds
•
every 40 seconds
•
every 1 minute
•
every 2 minutes
•
Wake length
Set the length of the displayed wake to 1,
2, 5, 10, 20, 30, 60 or 120 minutes.
Press Return twice to return to the
screen.
Demo control
See Using demo mode, on page 19 to use
Demo mode for simulating vessel motion
in any area of the world.
Reference section 1 — Using the Chart Screen
Chart
Setting up the chart screen
37