NorthStar 972 Quickstart Manual And Reference Manual page 82

Reference section 5 — Creating waypoints and routes
78
Editing a route
one below. After having accessed a route,
as described in Editing a route, starting on
page 76:
1. Press the cursor pad to move the cursor onto
the route's last waypoint (or first waypoint, or
.
a leg)
Waypoint (0001) selected in the route
Add to end
2. Press (or
Split leg
).
3. Move the cursor to the location that you want
to add to the route (either an existing way-
point, or any other spot).
As you move the cursor, the 972 displays
the new route leg as a dotted line to the
cursor position.
4. Press a menu key once to add the waypoint:
If you selected an existing
•
waypoint, the key is marked Add
waypoint.
5. Repeat for each new waypoint or cursor loca-
6. When you're finished, press
Removing waypoints from a route
To remove waypoints from the route (the
waypoint is not erased from the 972):
1. Move the cursor to the waypoint you want to
Add to front
or
2. When done, press
Editing a route using a waypoints list
After you have accessed a route, as
described in Editing a route, starting on
otherwise, the key will read Add
•
new waypoint.
If you're adding a waypoint to a leg,
•
the key is marked Split leg. Move
the cursor to the new waypoint
position and press Insert new
waypoint.
tion you want to add to the route.
Return
Instead, you can press
list-based editing.
Remove waypt
remove, then press
Even if you remove all the waypoints from a
route, the 972 still retains the empty route.
To remove the route entirely, see Erasing
an entire route, on page 79.
Return
to go to list-based
editing.
Cancel add.
to switch to
.
Northstar 972