ISTRUZIONI PER LO SMONTAGGIO - INSTRUCTIONS FOR DISASSEMBLING
1 Per smontare il modulo frontale, inserire la
punta di un cacciavite (1) e ruotare ¼ per liberare
l'aletta del modulo frontale dalla relativa guida.
Spingere lievemente il frontale per liberare
completamente l'aletta. Ripetere i passaggi
precedenti per liberare l'altra aletta e sbloccare
completamente il modulo frontale.
Nota: Usare un cacciavite a punta piatta da 6
mm, o similare.
To disassemble the front module, insert the tip of
a screwdriver (1) and give it a quarter-turn to
release the tab of the front module from its slot.
Push the front module gently to free the tab
completely. Repeat these steps to free the other
tab (2) and to detach the front module completely
(3).
Note: Use a screwdriver with a flat tip 6 mm
across or similar.
112 | ABB