General Information
Operator's Manual
Electrical Drawings
Standard Control Module (SCM)
Diesel Engine − Electrical Components
Electrical System: General Information
The Operator's Manual provides information regarding the operation, general
maintenance and maintenance intervals for your Reelmaster machine. Refer to
the Operator's Manual for additional information when servicing the machine.
The electrical schematic and wire harness drawings for the Reelmaster 3100−D
and the Reelmaster 3105−D are located in Chapter 9 − Foldout Drawings.
All Reelmaster 3100–D and 3105–D machines are equipped with a Standard
Control Module (SCM) to monitor and control electrical components required for
safe operation. The SCM can be used to check operation of machine switches
by monitoring the SCM LED's. Detailed information on the Standard Control
Module can be found later in this chapter.
The engine used in the Reelmaster incorporates the following electrical
components to start and run properly:
•
Glow plug controller and relay
•
Fuel stop Solenoid
•
High Temp Warning and Shutdown Switches
•
Oil Pressure Switch
•
Alternator
Additional information on troubleshooting and servicing engine electrical
components can be found in the appropriate
Kubota Workshop
Page 6–2
Manual.
Reelmaster
®
3100-D/3105-D
20252SL Rev A