Toro Reelmaster 3100-D Service Manual page 159

Installing the Piston Pump/Hydrostat (continued)
Reelmaster ® 3100-D/3105-D
20252SL Rev A
13. Remove caps and plugs from all fittings and hydraulic hoses. Using labels
placed during pump removal, properly connect hydraulic lines to pump
assembly (see Installing Hydraulic Hoses and Tubes (O-Ring Face Seal
Fittings) (page 5–6)).
14. Install neutral arm assembly to the piston pump (see
Arm (page 5–78)).
15. Fill hydraulic tank with new hydraulic fluid.
16. Properly charge hydraulic system (see
5–69)).
17. Adjust the traction drive for neutral; refer to Operator's Manual.
18. Lower and secure hood.
Charge Hydraulic System (page
Page 5–83
Installing the Neutral
Hydraulic System: Service and Repairs